How To Change Code On Schlage Lock Be365

Homeowners That Haven’t Changed The Original Code Should Find It Written In Their Installation Guide Or On The Back Side Of The Deadbolt.

To add a new code at any time you will follow this sequence: In summary, if your schlage be365 programming code isn’t working, perform a factory reset on the lock, then reprogram your lock with the default programming code. Press and release the schlage button on the front of the lock.

The Lock Will Flash Green And Beep Once, And That Means The Operation Is Successful.

Press the schlage button.* 2. Rotate the thumbturn away from the hinges. Wait for the lock to beep three times and flash orange light times.

You Should Also Change The Default Programming Code And User Codes After The.

Rotate knob/lever to open door.* Key override can be used when the battery is completely dead, or when no valid user code is known. How to change code on schlage lock be365.

* If The Turn Lock Feature Is Disabled, A Valid User Code Must Be Entered To Lock The Door.

As mentioned above, only reset the lock if you can find the default programming code, as you’ll need it to program your lock from now on. The schlage button will light green for one second. Model be365 locking and unlocking from the outside:

The Following Steps Must Occur Within 10 Seconds:

After you reset the schlage be365 electronic deadbolt check out our video overview on the schlage be365 and on how to program and add / change user codes in. This type of lockset can store up to 19 different individual codes, permitting you to set temporary codes to. Then, press and hold the schlage button until it lights green and the lock beeps.