close
close

How To Reset Maytag Washer Mvwx655Dw1. The washer’s led display should now flash and start to blink, which means the error codes have been resolved and the washer has reset. Why do you say the washer needs to be reset, what issue are you having with it?

How To Reset Maytag Washer Mvwx655dw1 saintjohn from ba6.bimford.com

I watched a video on youtube that showed my exact problem. Then turn the dial counterclockwise making one full rotation and coming back to the ‘normal’ position. With the washer shut off, the basket empty (no water or clothes) and the lid closed, enter the diagnostic mode:

The Motor Has Now Been Reset And Is Ready For You To Start A Cycle.

You have 30 seconds to start lifting and lowering the lid. Rotate cycle selector knob clockwise one click and wait ½ second. Plug the washer back in and lift and lower the lid 6 times within a 12 second period.

After Reset, Sequence “A” Through “E” Must Be Completed Within 6 Seconds.

To do that you have to first make sure that the main dial is at its standard ‘normal’ position. Then turn the dial counterclockwise making one full rotation and coming back to the ‘normal’ position. The washer’s led display should now flash and start to blink, which means the error codes have been resolved and the washer has reset.

The Motor Has Now Been Reset And Is Ready For You To Start A Cycle.

Unplug the washer for 1 minute from the electrical outlet. How to enter service mode on whirlpool or maytag washer. After reset, sequence “a” through “e” must be completed within 6 seconds.

I Show You How To Put The Machine Into Test Mode And Run A Test Cycle.maytag Washer Pump:

Mvwx655dw1this video is a protech repair, filmed by the technician in the customer's home. Quickly (within about 6 seconds) turn the control dial 3 clicks clockwise, one click counterclockwise, and one more click clockwise. Why do you say the washer needs to be reset, what issue are you having with it?

Hold Down The Delicates And Knits Button For Five Seconds.

Unplug or turn the circuit breaker off for 30 seconds. The only reset for that board is to unplug the washer for 5 minutes and plug it back in. Turn the control dial 1 complete rotation counterclockwise.

Categories: How to

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published.